Question: Can a tankless water heater work for the whole-house?

A whole-house tankless water heater is built to provide continuous hot water whenever you need it. Both tank and tankless whole-house water heaters have their advantages. Tank-type water heaters have a lower upfront cost and are often easier to install when replacing a similar type tank water heater.

Are tankless water heaters good for large homes?

Though gas-fired tankless units are great performers for whole-house use, electric units are woefully inadequate. Electric units are not Energy Star-rated, Aikens says, and “require significant amounts of energy to use.”

Can I heat my house with a tankless water heater?

Many people look at these small appliances and think, “Why cant I use one to heat my house?” The answer is, you can. Its true that a tankless water heater can easily heat most single-family homes. Its also true that a tankless water heater is smaller and less expensive than a boiler or a furnace.

What size tankless water heater do you need for a 3 bedroom house?

Sizing Guide for Residential Tankless Water heaterHousehold OccupantsUsageCapacity Required (Measured in Gallon)2-3 peopleHigh40-503-4 peopleRegular/Low40High50-756 more rows

Why is tankless water heater installation so expensive?

Installation is expensive because the unit needs a bigger gas supply than a conventional water heater does, and it needs to run its own exhaust flue to the exterior. Installation costs can vary widely, depending on the location of the flue and the gas supply. The unit itself costs between $800 and $1,000.

What size tankless water heater do I need for a family of 5?

In short, a family of 5 would need a 10 GPM gas tankless heater or 27 kW electric tankless heater if you live in the northern part of the USA, where the input water has a lower temperature. The tankless heater has to work extra hard to bring the water temperature up to 110˚F or 120˚F.

How do I know what size tankless water heater I need?

How to Select the Right Size Tankless Water HeaterDetermine the maximum number of devices you want to run and their total flow rate. Then, add up their flow rates (gallons per minute). Determine required temperature rise. Sizing Example: An average shower will be between 104–106° and uses 2.6 gallons of water.

What size tankless water heater is needed for a family of 4?

Tankless water heaters are sized by their flow rate or Gallons Per Minute (GPM). A family of 4 should look for a tankless water heater that can produce 7 gallons of hot water per minute. Most families use about 6.5 GPM during peak times.

How long do electric tankless hot water heaters last?

20 years Most tankless water heaters have a life expectancy of more than 20 years. They also have easily replaceable parts that extend their life by many more years.

How long does a tankless water heater last?

20 years Most tankless water heaters have a life expectancy of more than 20 years. They also have easily replaceable parts that extend their life by many more years. In contrast, storage water heaters last 10–15 years.

How often do I need to flush my tankless water heater?

Keeping up with maintenance, including tankless water heater cleaning, should take place at least once a year. You may need to take care of other tasks, such as wiping down the exterior of the unit, more often, especially if the area where you install the water heater receives a lot of dust.

What size tankless water heater is needed for family of 4?

Tankless water heaters are sized by their flow rate or Gallons Per Minute (GPM). A family of 4 should look for a tankless water heater that can produce 7 gallons of hot water per minute. Most families use about 6.5 GPM during peak times.

What is a good size tankless water heater?

Answer: Youll need to raise the incoming water temperature from 40 degrees to 105. Youll need to be able to heat at least 5.2 gallons of water. So youll need a tankless water heater that can produce at least a 60 degree rise in temperature at 5.2 gallons per minute.

What size breaker do I need for a tankless water heater?

A gas tankless water heater only needs a 15-amp, 120 volt dedicated single-pole breaker for this purpose.

What happens if you dont flush your tankless water heater?

Tankless water heaters wont explode, but if you dont flush out the sediment, you may force the units heat exchanger to work harder than necessary. Keeping sediment flushed out not only helps the water heater work more efficiently, but it can also prevent other problems.

Should I flush my tankless water heater?

Unlike tank-style units that could go several years between maintenance, tankless water heaters should be flushed once a year.

What are the electrical requirements for a tankless water heater?

Unfortunately, the average electric tankless water heater needs at least 120 amps to operate and the average households total capacity is 200 amps. This means you will have to upgrade your electrical system to accommodate for the larger load demand, which could cost you up to $1,500.

Reach out

Find us at the office

Hallinan- Tripathy street no. 70, 34851 San José, Costa Rica

Give us a ring

Letha Berlinger
+71 206 631 295
Mon - Fri, 10:00-14:00

Write us