Most magnet-type stud finders dont work effectively since they reply on locating the fasteners (screws) used to secure the drywall. These can be very difficult to locate.
Are there any reliable stud finders?
For an accurate and quick stud finder, we recommend the Franklin Sensors 710 Precision Stud Finder. It can detect more than one stud at once, and the deep scan mode allows you to detect studs in thicker walls.
Why is my stud finder not accurate?
1) Check Your Battery. If your stud finder worked previously, but no longer seems to work, about 9 times out of 10, the problem is a weak battery. You may swear that the battery is still good, but its not. Each of these batteries has a printed expiration date, but they are all in different locations on the battery.
Do professionals use stud finders?
They cant detect the actual stud, so theres some guesswork as you look for the exact center. Electronic stud finders actively detect differences in wall density to find studs. These radar-like tools typically only get used by professionals to “see” whats behind the wall beyond just studs.
Is it worth buying a stud finder?
A stud finder is good for, well, finding studs you cant see. Knowing where those are is crucial so you can be sure to screw into them instead of just the drywall when youre hanging something heavy, like a mirror or a mount for, say, a flat-screen TV.
What is the best stud detector?
The Best Stud Finder for Home UseOur pick. C.H. Hanson 03040 Magnetic Stud Finder. Durable, affordable, and accurate. Runner-up. Studpop Magnetic Stud Finder. Smaller scanning area, but still great. Upgrade pick. Franklin Sensors ProSensor 710. An electronic option thats expensive, but even more efficient.
What if I cant find a stud in the wall?
There are several savvy ways to spot studs without any tool. Take a look at baseboard trim or crown molding. Baseboards should be attached to studs and if the spacing of nails is about 16 inches this might be the case. Spot the nails with your eye then knock on the wall directly above the nail location.
Are studs always 16 apart?
The general spacing for wall studs is 16 inches on center, but they can be 24 inches.
Why do stud finders never work?
Most magnet-type stud finders dont work effectively since they reply on locating the fasteners (screws) used to secure the drywall. These can be very difficult to locate.
How do I turn my phone into a stud finder?
0:292:25Free Stud Finder - YouTubeYouTube
How to Find a Wall Stud Without a Stud FinderShine a flashlight at a steep angle against the wall. Examine the baseboard for nails or outlets. Measure 16 inches from the first stud you find to approximate the location of the next one. Drive a small nail into the wall where you believe you have found a stud.
What to do if studs are too far apart?
If the studs are too far apart, there are a couple options: You can use a piece of ¾” plywood and run it across the distance between the studs, securing that to both studs. Use that to secure your mount to for the best support. You can also purchase a mount that is larger, to bridge the gap between the studs.
Are nails in the middle of studs?
Once you find a stud, I recommend using a nail or small drill bit to locate the center of the stud. Tap a nail halfway into the drywall and if you cant push it in, youre on the stud.
Are outlets always on studs?
2 Answers. Yes, in general electrical outlets are installed directly next to a stud. However, apartments may have some different things going on: There may be metal studs.
How far apart do you put studs?
When a home is framed, the wall studs are usually spaced 16 or 24 inches apart. If you start in a corner and measure out 16 inches and you dont find a stud, you should find one at 24 inches.
Do TV mounts have to be on studs?
Most TV mounts are designed for drywall, which makes for easy DIY products, but naturally requires the presence of studs. The good news is that you can still mount your TV despite the hollow walls with Mount-Its No Stud TV Wall Mount that hangs on your wall like a picture frame.
How do you know if you hit a stud?
Simply drill or nail into the wall at the location you found with a stud finder. If it goes in and gets stuck, youve hit the stud. If it suddenly slides into the wall and is easy to pull out, youve gone through the drywall and hit air!
How big of a hole can you drill in a stud?
Any stud may be bored or drilled, provided that the diameter of the resulting hole is no more than 60 percent of the stud width, the edge of the hole is no more than 5/8 inch (16 mm) to the edge of the stud, and the hole is not located in the same section as a cut or notch.